Home > Electronics > Boards/Boxes
Breadboards Copper Clad Circuit Boards
Digital / Analog Trainers Prototyping Boards
Storage Boxes
Sort By:
Page of 2
MODEL NO. PB-18 - 2.8" X 1.8"
Part Number: 0302PB18
Size: 6.3" x 4.5"
Size: 6.3" x 4.5"
Our Price: $2.50
Part Number: 0302PB13
BREADBOARD / SOLDERLESS (3.3" X 1.8")
Part Number: 03MB101
BREADBOARD / SOLDERLESS (3.3" X 2.1")
Part Number: 03MB801
BREADBOARD / SOLDERLESS (6.5" X 2.1") WITH JUMPER WIRE KIT
Part Number: 03MB102
High quality solderless breadboard. Standard size. Perfect for prototyping.


Arduino Micro
Arduino Micro
Our Price: $26.90
The Arduino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

Heavy Duty Cash Register
FREE SHIPPING
Heavy Duty Key-Lock Cash Drawer General Features: Black color Heavy-duty metal design
. Removable bill tray. Spring-loaded bill clips. Removable coin tray. Front panel slip deposit slot opens via key lock or solenoid signal Lock mechanically locks drawer. RJ12 phone jack
POWERED BREADBOARD
POWERED BREADBOARD
Our Price: $69.95
Part Number: 03PBB272
RF ADAPTER KIT
RF ADAPTER KIT
Our Price: $94.50
Part Number: 24RFADKIT
Arduino GSM Shield with Integrated Antenna
The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel (datasheet). It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield.

The shield uses digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10's TX pin and pin 3 to its RX pin. See these notes for working with an Arduino Mega, Mega ADK, or Leonardo. The modem's PWRKEY pin is connected to Arduino pin 7.

The M10 is a Quad-band GSM/GPRS modem that works at frequencies GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP and HTTP protocols through a GPRS connection. GPRS data downlink and uplink transfer speed maximum is 85.6 kbps. To interface with the cellular network, the board requires a SIM card provided by a network operator. See the getting started page for additional information on SIM usage.

The most recent revision of the board uses the 1.0 pinout on rev 3 of the Arduino Uno board. Notes on the Telefonica/Bluevia SIM included with the shield

The GSM shield comes bundled with a SIM from Telefonica/Bluevia that will work well for developing machine to machine (M2M) applications. It is not necessary to use this specific card with the shield. You may use any SIM that works on a network in your area. The Bluevia SIM card includes a roaming plan. It can be used on any supported GSM network. There is coverage throughout the Americas and Europe for this SIM, check the Bluevia service availability page for specific countries that have supported networks. Activation of the SIM is handled by Bluevia. The SIM must be inserted into a powered GSM shield that is mounted on an Arduino for activation.