This is a 100 Ohm (100 Ω) single-turn cermet trimmer potentiometer with a linear taper, rated 0.5 W. A 100 Ohm value is commonly used for small adjustments in low-resistance circuits, such as fine-tuning a current-limiting or LED brightness setting. The 3/8" square body adjusts from the top and mounts through-hole by its pins.
Key Features
- 100 Ohm (100 Ω) resistance, ±10% tolerance
- Single-turn, top-adjust trimmer
- Linear taper; cermet element rated 0.5 W
- 3/8" square body with through-hole pin terminals
Specifications
| Resistance | 100 Ohms |
|---|---|
| Tolerance | ±10% |
| Power rating | 0.5 W |
| Number of turns | 1 |
| Taper | Linear |
| Resistive material | Cermet |
| Type | 3/8" square |
| Actuator orientation | Top |
| Mounting | Through hole |
| Termination | Pins |
| SKU | 18CPH100 |
What's Included
- 100 Ohm cermet trimmer potentiometer
Ideal For
Set-and-forget 100 Ohm calibration and trimming on circuit boards and prototypes.
Frequently Asked Questions
What is a trimmer potentiometer?
A small pot meant to be set once (or rarely) with a screwdriver or fingertip, usually during calibration, rather than a front-panel control turned every day.
Linear or audio taper?
Linear. The 100 Ohm resistance changes evenly as you turn it, which is what you want for calibration, dividers and setpoints.
What is the resistance code for 100 Ohm?
In the three-digit code used on many potentiometers and trimmers, 100 Ohm is written 101: the first two digits (10) followed by 1 zero. Markings vary by maker, so go by the listed value.


