This is a 1K Ohm (1 kΩ) single-turn cermet trimmer potentiometer with a linear taper, rated 0.5 W. A 1K Ohm value is commonly used for transistor biasing, LED and current adjustment, and voltage dividers fed from a low-impedance source. The 3/8" square body adjusts from the top and mounts through-hole by its pins.
Key Features
- 1K Ohm (1 kΩ) resistance, ±10% tolerance
- Single-turn, top-adjust trimmer
- Linear taper; cermet element rated 0.5 W
- 3/8" square body with through-hole pin terminals
Specifications
| Resistance | 1,000 Ohms |
|---|---|
| Tolerance | ±10% |
| Power rating | 0.5 W |
| Number of turns | 1 |
| Taper | Linear |
| Resistive material | Cermet |
| Type | 3/8" square |
| Actuator orientation | Top |
| Mounting | Through hole |
| Termination | Pins |
| SKU | 18CPH1K |
What's Included
- 1K Ohm cermet trimmer potentiometer
Ideal For
Set-and-forget 1K Ohm calibration and trimming on circuit boards and prototypes.
Frequently Asked Questions
What is a trimmer potentiometer?
A small pot meant to be set once (or rarely) with a screwdriver or fingertip, usually during calibration, rather than a front-panel control turned every day.
Linear or audio taper?
Linear. The 1K Ohm resistance changes evenly as you turn it, which is what you want for calibration, dividers and setpoints.
What is the resistance code for 1K Ohm?
In the three-digit code used on many potentiometers and trimmers, 1K Ohm is written 102: the first two digits (10) followed by 2 zeros. Markings vary by maker, so go by the listed value.


