1M Ohm (1 MΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
1M Ohm (1 MΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
1M Ohm (1 MΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
  • Load image into Gallery viewer, 1M Ohm (1 MΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
  • Load image into Gallery viewer, 1M Ohm (1 MΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
  • Load image into Gallery viewer, 1M Ohm (1 MΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole

1M Ohm (1 MΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole

18CPH1M
Regular price
$0.65
Sale price
$0.65
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

This is a 1M Ohm (1 MΩ) single-turn cermet trimmer potentiometer with a linear taper, rated 0.5 W. A 1M Ohm value is commonly used for very long RC time constants, high-impedance circuits and bias adjustment where current draw must be tiny. The 3/8" square body adjusts from the top and mounts through-hole by its pins.

Key Features

  • 1M Ohm (1 MΩ) resistance, ±10% tolerance
  • Single-turn, top-adjust trimmer
  • Linear taper; cermet element rated 0.5 W
  • 3/8" square body with through-hole pin terminals

Specifications

Resistance 1,000,000 Ohms
Tolerance ±10%
Power rating 0.5 W
Number of turns 1
Taper Linear
Resistive material Cermet
Type 3/8" square
Actuator orientation Top
Mounting Through hole
Termination Pins
SKU 18CPH1M

What's Included

  • 1M Ohm cermet trimmer potentiometer

Ideal For

Set-and-forget 1M Ohm calibration and trimming on circuit boards and prototypes.

Frequently Asked Questions

What is a trimmer potentiometer?
A small pot meant to be set once (or rarely) with a screwdriver or fingertip, usually during calibration, rather than a front-panel control turned every day.

Linear or audio taper?
Linear. The 1M Ohm resistance changes evenly as you turn it, which is what you want for calibration, dividers and setpoints.

What is the resistance code for 1M Ohm?
In the three-digit code used on many potentiometers and trimmers, 1M Ohm is written 105: the first two digits (10) followed by 5 zeros. Markings vary by maker, so go by the listed value.