50K Ohm (50 kΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
50K Ohm (50 kΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
50K Ohm (50 kΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
  • Load image into Gallery viewer, 50K Ohm (50 kΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
  • Load image into Gallery viewer, 50K Ohm (50 kΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole
  • Load image into Gallery viewer, 50K Ohm (50 kΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole

50K Ohm (50 kΩ) Cermet Trimmer Potentiometer – Single Turn, Linear, 0.5W, 3/8" Square, Top Adjust, Through Hole

18CPH50K
Regular price
$0.65
Sale price
$0.65
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

This is a 50K Ohm (50 kΩ) single-turn cermet trimmer potentiometer with a linear taper, rated 0.5 W. A 50K Ohm value is commonly used for higher-impedance voltage dividers, RC timing (for example 555 timer circuits) and gain adjustment. The 3/8" square body adjusts from the top and mounts through-hole by its pins.

Key Features

  • 50K Ohm (50 kΩ) resistance, ±10% tolerance
  • Single-turn, top-adjust trimmer
  • Linear taper; cermet element rated 0.5 W
  • 3/8" square body with through-hole pin terminals

Specifications

Resistance 50,000 Ohms
Tolerance ±10%
Power rating 0.5 W
Number of turns 1
Taper Linear
Resistive material Cermet
Type 3/8" square
Actuator orientation Top
Mounting Through hole
Termination Pins
SKU 18CPH50K

What's Included

  • 50K Ohm cermet trimmer potentiometer

Ideal For

Set-and-forget 50K Ohm calibration and trimming on circuit boards and prototypes.

Frequently Asked Questions

What is a trimmer potentiometer?
A small pot meant to be set once (or rarely) with a screwdriver or fingertip, usually during calibration, rather than a front-panel control turned every day.

Linear or audio taper?
Linear. The 50K Ohm resistance changes evenly as you turn it, which is what you want for calibration, dividers and setpoints.

What is the resistance code for 50K Ohm?
In the three-digit code used on many potentiometers and trimmers, 50K Ohm is written 503: the first two digits (50) followed by 3 zeros. Markings vary by maker, so go by the listed value.