- Business grade coin counter, sorter and wrapper for the following U.S. Coins: Dollar Coins, Quarters, Nickels, Dimes and Pennies
- Easy to use — Simply pour your coins into the hopper then press start. The machine will begin automatically counting and sorting your coins and can be set to pause whenever a tray or bin is full. You can select between using the included tubes (for use with coin wrappers) or bins.
- The hopper holds up to 500 coins that are rapidly sorted at a rate of 270 coins per minute
- The backlit LCD screen not only shows a total count, but also a count of each separate denomination
- Features a convenient fold-out handle for carrying. 36 preformed coin wrappers are included.
- NOTE: Wrapping the coins must be done by hand after the machine has counted the correct quantity into the chutes. Simply slide the wrapper over the stack of coins, flip the chute upside down and lift the chute away, then fold the wrapper shut. Place the chute back in place and press Start to count another roll.
Business grade coin counter, sorter and wrapper for the following U.S. Coins: Dollar Coins, Quarters, Nickels, Dimes and Pennies. Easy to use — Simply pour your coins into the hopper then press start. The machine will begin automatically counting and sorting your coins and will pause whenever a tray or bin is full. You can select between using the included tubes (for use with coin wrappers) or bins. The hopper holds up to 500 coins that are rapidly sorted at a rate of 270 coins per minute. Features a backlit LCD screen that not only shows a total count, but also a count of each separate denomination. The sorter is pre-programmed with three modes: One option stops the machine when the coin trays are full, a second to stop the machine when the tubes are full, and a third feature to clear the batch modes to count freely without stopping. Features a convenient fold-out handle for carrying. 36 preformed coin wrappers are included for Quarters, Nickels, Dimes and Pennies.
Instructions for using the coin wrappers with the coin counter:
1. Turn on the coin counter
2. Press the SET button. The number on the left represents the coin and the number on the right represents the number of that coin that the counter will stop at. You will likely see the $1.00 coin first and the default stopping point is at 200 coins. You can press the plus "+" or minus "-" buttons to set the number of coins for the machine to count to before stopping. The SET button switches the coin that you are adjusting. If you hold the plus or minus buttons (hold for 5 seconds or so, until you hear a beep), this should set the appropriate number for the coins to fit in the wrappers - for example, Quarters will be set to 40, as the wrapper holds $10 in quarters.
3. Once you have confirmed that the desired stopping points are set for all coins, press the START button. You can now load the coin sorter with coins and press START again to begin the counting.
4. After the coins have reached the stopping point, you can remove the coin rolls and push the wrapper over the coins, flipping the plastic roll upside down so that the coins load into the wrapper.
5. Put the plastic rolls back into the coin sorter. At this time you can either adjust the stopping points or press clear to see your total. You can now load another set of coins and press START, they will continue to be added to the total.