The Parallax 32400 XBee USB Adapter Board is a partially assembled kit that connects an XBee or XBee Pro module to a computer over USB or to a microcontroller. It converts the XBee's 2 mm pin spacing to breadboard-friendly 0.100 in spacing and lets you configure modules with Digi's X-CTU software. The header must be soldered on, and a USB A to mini B cable is needed to reach a computer.
Key Features
- USB connection for configuring XBee modules with Digi X-CTU
- Onboard 3.3 V voltage regulator powered from 5 V USB or VDD pin
- Converts 2 mm XBee pin spacing to 0.100 in
- 4 status LEDs: Power, RSSI, Associate and mode (sleep/on)
- Pluggable-wire or solder connections and mounting holes
- Pin-out compatible with Parallax's other XBee adapter boards
Specifications
| Brand / model | Parallax 32400 |
|---|---|
| Supply | 5.0 V from USB or VDD pin; 3.3 V generated on-board |
| Current | Varies with XBee model |
| Communication | Serial pass-through to XBee; USB to host PC |
| PCB size | 1.5 x 1.0 in (38.1 x 25.4 mm) |
| Operating temperature | -40 to 158 °F (-40 to 70 °C) |
| Assembly | Partially assembled; soldering required |
| SKU | 32PX32400 |
What's Included
- XBee Adapter Board PCB, 1
- 10-pin 2 mm sockets, pre-installed, 2
- 40-pin SIP header (#451-04001), 1
What You'll Need (Sold Separately)
- XBee or XBee Pro module
- USB A to mini B cable
- Soldering iron, solder, flux, diagonal cutters or hobby knife, and safety glasses
Ideal For
Configuring XBee radios from a PC and prototyping XBee links on a breadboard.
Frequently Asked Questions
Is an XBee module included?
No. The kit is the adapter board, two pre-installed sockets and a header; the XBee module is separate.
Can it power an XBee Pro?
The listing notes the Rev A regulator is rated 100 mA continuous / 300 mA peak. That covers regular XBee modules and the intermittent transmissions typical of XBee Pro use, but continuous XBee Pro transmission is better suited to Parallax's 32402 or 32403 adapters.
Does it need soldering?
Yes. The header must be soldered to the board.
Wear safety glasses when soldering and trimming leads.